Presentation Transcript

1. 5 Fire Behavior

2. Objectives (1 of 4) • Describe the chemistry of fire. • Define the three states of matter. • Describe how energy and work are interrelated. • Describe the conditions needed for a fire. • Explain the chemistry of combustion. • Describe the products of combustion.

3. Objectives (2 of 4) • Explain how fires can spread by conduction, convection, and radiation. • Describe the four methods of extinguishing fires. • Define Class A, B, C, D, and K fires. • Describe the characteristics of solid-fuel fires.

4. Objectives (3 of 4) • Describe the ignition phase, growth phase, fully developed phase, and decay phase of a fire. • Describe the characteristics of a room-and-contents fire. • Explain the causes and characteristics of flameover, flashover, thermal layering, and backdraft.

5. Objectives (4 of 4) • Describe the characteristics of liquid-fuel fires. • Define the characteristics of gas-fuel fires. • Describe the causes and effects of a boiling liquid expanding vapor explosion (BLEVE). • Describe the process of reading smoke.

6. Introduction • Understanding of fire behavior is the basis for all firefighting principles and actions. • Understanding fire behavior requires knowledge of physical and chemical processes of fire.

7. The Chemistry of Fire • Understanding how fire ignites and grows will assist in the fire fighter’s ability to extinguish fire situations. • Being well trained in fire behavior will allow the fire fighter to control a fire utilizing less water.

8. What Is Fire? • Rapid chemical process that produces heat and usually light • Fire is neither solid nor liquid. • Wood is a solid, gasoline is a liquid, and propane is a gas—but they all burn.

9. Fuel • What is actually being burned • Physical states • Solid • Liquid • Gas • Combustion occurs when fuel is in a gaseous state.

10. Solids • Most fuels are solids. • Pyrolysis releases molecules into atmosphere. • Converts solid to a gas • Solids with high surface-to-mass ratio combust more easily and rapidly.

11. Liquids • Assume the shape of their containers • Vaporization is the release of a liquid’s molecules into the atmosphere. • Liquids with a high surface-to-volume ratio vaporize and combust more easily and rapidly.

12. Gases • Have neither shape nor volume • Expand indefinitely • Fuel-to-air ratio must be within a certain range to combust.

13. Types of Energy • Chemical • Mechanical • Electrical • Light • Nuclear

14. Chemical Energy • Energy created by a chemical reaction. • Some of these reactions produce heat and are referred to as exothermic reactions. • Some of these reactions absorb heat and are referred to as endothermic reactions.

15. Mechanical Energy • Converted to heat when two materials rub against each other and create friction • Heat is also produced when mechanical energy is used to compress air in a compressor.

16. Electrical Energy • Produces heat while flowing through a wire or another conductive material • Examples of electrical energy • Heating elements • Overloaded wires • Electrical arcs • Lightning

17. Light Energy • Caused by electromagnetic waves packaged in discrete bundles called photons • Examples of light energy • Candles • Light bulbs • Lasers

18. Nuclear Energy • Created by nuclear fission or fusion • Controlled (nuclear power plant) • Uncontrolled (atomic bomb explosion) • Release radioactive material

19. Conservation of Energy • Energy cannot be created or destroyed by ordinary means. • Energy can be converted from one form to another. • Chemical energy in gasoline is converted to mechanical energy when a car moves along a road.

20. Conditions Needed for Fire • Three basic factors required for combustion: • Fuel • Oxygen • Heat • Chemical chain reactions keep the fire burning.

21. Chemistry of Combustion (1 of 2) • Exothermic reactions • Reactions that result in the release of heat energy • Endothermic reactions • Reactions that absorb heat or require heat to be added

22. Chemistry of Combustion (2 of 2) • Oxidation • Combustion • Pyrolysis

23. Products of Combustion • Combustion produces smoke and other substances. • Specific products depend on: • Fuel • Temperature • Amount of oxygen available • Few fires consume all available fuel.

24. Smoke • Airborne products of combustion • Consists of: • Ashes • Gases • Aerosols • Inhalation of smoke can cause severe injuries.

25. Smoke Contents (1 of 2) • Particles • Solid matter consisting of unburned, partially, or completely burned substances • Can be hot and/or toxic • Vapors • Small droplets of liquids suspended in air • Oils from the fuel or water from suppression efforts

26. Smoke Contents (2 of 2) • Gases • Most gases produced by fire are toxic. • Common gases include: • Carbon monoxide • Hydrogen cyanide • Phosgene

27. Heat Transfer • Combustion gives off heat that can ignite other nearby fuels. • Heat energy always flows from hotter to colder. • Three methods of heat transfer: • Conduction • Convection • Radiation

28. Conduction • Heat transferred from one molecule to another (direct contact) • Conductors transfer heat well. • Insulators do not transfer heat well.

29. Convection • Movement of heat through a fluid medium such as air or a liquid • Creates convection currents

30. Convection Within a Room • Hot gases rise, then travel horizontally. • Gases then bank down a wall or move outside the room. • Horizontally • Vertically

31. Radiation • Transfer of heat in the form of an invisible wave • Heat radiated to a nearby structure can ignite it. • Radiated heat passing through a window can ignite an object.

32. Methods of Extinguishment • Cool the burning material. • Exclude oxygen. • Remove fuel. • Break the chemical reaction.

33. Classes of Fire (1 of 2) • Fires are classified according to type of fuel. • Extinguishing agents are classified to match type(s) of fires they extinguish. • A fire can fit into more than one class.

34. Classes of Fire (2 of 2) • Five classes of fires: • Class A • Class B • Class C • Class D • Class K

35. Class A • Fuel: Ordinary solid combustibles • Wood • Paper • Cloth • Extinguishing agents: • Water (cools the fuel)

36. Class B • Fuel: Flammable or combustible liquids • Gasoline • Kerosene • Oils • Extinguishing agents: • Foam or carbon dioxide • Dry chemicals

37. Class C • Fuel: Energized electrical equipment • Underlying fuel is often Class A or Class B • Special classification required due to electrical hazards • Extinguishing agents: • Carbon dioxide • Use of water is not advised. • Be sure to shut off power before using water.

38. Class D • Fuel: Burning metals • Potassium • Lithium • Magnesium • Extinguishing agents: • Special salt-based powders or dry sand • Do not use water.

39. Class K • Fuel: Combustible cooking media • Cooking oils • Grease • Extinguishing agents: • Designation is new and coincides with a new classification of Class K extinguishing agents.

40. Phases of Fire • Four distinct phases: • Ignition • Growth • Fully developed • Decay

41. Ignition Phase • Fuel, heat, and oxygen are present. • Fuel is heated to its ignition temperature.

42. Growth Phase • Additional fuel is involved. • Fire grows larger. • Convection draws more air into fire. • Thermal layering • Hot gases collect at ceiling and bank downward.

43. Flashover • Point between growth phase and fully developed phase • All combustible materials in a room ignite at once. • Temperatures can reach 1000 °F. • Flashovers are deadly!

44. Fully Developed Phase • Heat produced at maximum rate • Oxygen consumed rapidly • Fire will burn as long as fuel and oxygen remain.

45. Decay Phase • Fuel is nearly exhausted. • Intensity reduces. • Eventually fire will go out.

46. Key Principles of Solid-Fuel Fire Development (1 of 2) • Hot gases and flame tend to rise. • Convection is the primary factor in spreading the fire upward. • Downward spread occurs primarily from radiation and falling chunks of flaming material. • If there is no remaining fuel, the fire will go out.

47. Key Principles of Solid-Fuel Fire Development (2 of 2) • Variations in the direction of fire spread occur if air currents deflect the flame. • The total material burned reflects the intensity of the heat and the duration of the exposure to the heat. • An adequate supply of oxygen must be available to fuel a free-burning fire.

48. Room Contents (1 of 2) • Many fires in buildings burn the contents of the structure, but do not involve the structure itself. • Most modern rooms are heavily loaded with materials made of plastics and synthetic materials. • These produce dense smoke that can be highly toxic.

49. Room Contents (2 of 2) • Newer upholstered furniture is more resistant to ignition from glowing sources, but it has little resistance to ignition from flaming sources. • Finishes used on walls and ceilings can burn readily. • This can increase the intensity and spread of the fire.

50. Special Considerations • Four conditions particular to interior fires that affect fire fighter (and civilian) safety: • Flashover • Flameover (or rollover) • Backdraft • Thermal layering and thermal balance

Load More ...