Types of Tillage There are various types of tillage. Minimum Tillage - It is the minimum soil manipulation necessary to meet tillage requirements for crop.

Presentation on theme: "Types of Tillage There are various types of tillage. Minimum Tillage - It is the minimum soil manipulation necessary to meet tillage requirements for crop."— Presentation transcript:

1 Types of Tillage There are various types of tillage. Minimum Tillage - It is the minimum soil manipulation necessary to meet tillage requirements for crop production. Strip Tillage - It is a tillage system in which only isolated bands of soil are tilled. Rotary Tillage - It is the tillage operations employing rotary action to cut, break and mix the soil. Mulch Tillage -It is the preparation of soil in such a way that plant residues or other mulching materials are specially left on or near the surface. Combined Tillage -Operations simultaneously utilizing two or more different types of tillage tools or implements to simplify, control or reduce the number of operations over a field are called combined tillage. Tillage is performed by tool, implement or machine.

2 Tool - It is an individual working element such as disc or shovel. Implement -It is an equipment generally having no driven moving parts, such as harrow or having only simple mechanism such as plough. Machine -It is a combination of rigid or resistant bodies having definite motions and capable of performing useful work.

3 Plough The main implement for primary tillage is plough used for ploughing operations. Ploughing is the primary tillage operations, which is performed to cut, break and invert the soil partially or completely. Ploughing essentially means opening the upper crust of the soil, breaking the clods and making the soil suitable for sowing seeds.

4 The purpose of ploughing can be summarized as below To obtain a deep seed bed of good texture. To increase the water holding capacity of the soil. To improve soil aeration. To destroy weeds and grasses. To destroy insects and pests. To prevent soil erosion and To add fertility to the soil by covering vegetation.

5 Normal Ploughing: It is the ploughing up to a depth of about 15 cm. Contour Ploughing: It is the method of ploughing in which the soil broken and turned along the contours. Ploughing of Land The ploughing of land separate the top layer of soil into furrow slices. The furrows are turned sideways and inverted to a varying degree, depending upon the type of plough being used. It is a primary tillage operation, which is performed to shatter soil uniformly with partial or complete soil inversion. There are a few important terms frequently used in connection with ploughing of land.

6 i) Furrow -It is a trench formed by an implement in the soil during the field operation. (ii) Furrow slice - The mass of soil cut, lifted and thrown to one side is called furrow slice. (iii) Furrow wall - It is an undisturbed soil surface by the side of a furrow. (iv) Crown - The top portion of the turned furrow slice is called crown.

7 (v) Back furrow A raised ridge left at the centre of the strip of land when ploughing is started from centre to side is called back furrow. When the ploughing is started in the middle of a field, furrow is collected across the field and while returning trip another furrow slice is lapped over the first furrow. This is the raised ridge which is named as back furrow

8 (vi) Dead furrow An open trench left in between two adjacent strips of land after finishing the ploughing is called dead furrow (Fig.1c). (vii) Head land – While ploughing with a tractor to turn, a strip of un ploughed land is left at each end of the field for the tractor to turn, that is called head land. At the end of each trip, the plough is lifted until the tractor and the plough have turned and are in position to start the return trip. The head land is about 6m for two or three bottom tractor plough and 1 m more for each additional furrow.

9 Methods of ploughing In order to provide furrows at all times on the right hand side of the plough two method of working are used a) Gathering b) Casting. a) Gathering - Whenever a plough works round a strip of ploughed land, it is said to be gathering. b) Casting - Whenever a plough works round a strip of un ploughed land, it is said to be casting. Ploughing of a field by casting or gathering alone is normally uneconomical. The following are a few important methods used in tractor ploughing. Fig 2a. Gathering b. Castering

10 i) Continuous ploughing method ii) Round and round ploughing Continous ploughing method In normal conditions, the continuous ploughing method is considered very convenient and economical. This is a method usually used in which the tractor and plough never run idle for more than three quarter land width along the headland and never turn in a space narrower than a quarter land width. In this method, first the headland is marked and the first ridge is set up at three quarter of a land width from the side.

11 The other ridges are set at full width over the field. The operator starts ploughing between the first ridge and the side land. The operator continues to turn left and cast in the three quarter land until a quarter land width of ploughing is completer on each side. At this stage, it is important to lift the plough to half depth for last trip down the side land of the field. This leaves a shallow furrow where the finish comes.

12 After this, the driver turns right and gathers round the land already ploughed on the first ridge. Gathering is continued till the un ploughed strip in first three-quarter land has been ploughed and completed. This gathering reduces the first full land by a quarter. The remaining three quarter land can be treated in exactly the same manner as the original three quarter land. This process is repeated for all other lands in the field.

13 (ii) Round and round ploughing In this method, the plough moves round and round a field. This system is adopted under conditions where ridges and furrows interfere with cultivation work. The field can be started in two ways. a) Starting at the centre A small plot of land is marked in the middle of the field and it is ploughed first. After that, the plough works round this small plot and the entire plot is completed. This is not a very economical method. b) Starting at the outer end Tractor starts ploughing at one end of the field and then moves on all the sides of the plot and comes gradually from the sides to the centre of the field. Wide diagonals are left unploughed to avoid turning with the plough. There are no back furrows in this method. Conventional ploughing is usually done by this method.

14 One way ploughing This system requires the use of a special type of plough known as reversible plough or one way plough. Such a plough turns furrows to the left or right. After the headland has been marked, the operator plough along a straight side land mark. At the end of the first trip, he turns his tractor in a loop and returns down the same furrow. No dead and back furrows are left in the field. In gently sloping fields, this method is suitable.

15 Soil inversion = Soil pulverization It is the quality of work in terms of soil aggregates and clod size. This is measured by penetrometer.